Is Floor Waxing a Difficult Process?

July 31, 2020 10:14 pm Published by Leave your thoughts

When you install your gorgeous tile or hardwood floors, you hope that they will stay looking gorgeous for years. Yet, in the back of your mind, you understand that the only way your new floors will stand the test of time is with some tender love and care. That’s where waxing comes in!

This essential aspect of floor maintenance helps preserve your hardwood or tile even as it protects from scratches, marks and other unsightly mistakes. Waxing can also slow the progress of grooves caused by continuous traffic. And that’s just the beginning of the benefits to waxing. Of course, to get the job done right, you have to follow the correct process to wax floors in South Amboy, NJ.

Prepping the space

The first step in a floor wax is to deep clean the area that will be waxed. Start by removing any furniture that can be moved. Then, sweep and mop the area. A lot of DIY-ers make the mistake of using a soiled broom and/or mop. That’s no good. You’ll have to specifically clean your broom and mop to ensure that your space is entirely free from dust and dirt. Any particles left over could have an impact on the overall quality of your wax job.

Use caution with the stripping materials

Before you can properly protect a floor with a new coat of wax, you have to remove what’s there. Be careful, though, because of all the steps to floor wax in South Amboy, NJ, stripping the floor is the most hazardous. Use lots of safety gear, including a face mask, plastic boots, specialized gloves and safety glasses.

Stripping the floor

Once the stripping agent has been applied to the floor, it should sit for around 15 minutes. Do not let the stripper dry. Over a few minutes, the stripping agent will collect minute particles of dust and debris that you can get rid of as you remove the stripper.


Once you’ve cleaned and stripped your area, it’s time to prepare the wax. Of course, waxing isn’t a one-size-fits-all solution. You have to use the right kind of wax that will bring out the brilliance of your floors. Once you’ve selected your wax, pour it into a bucket lined with a heavy-duty garbage bag. Dampen a new mop with a thin coat of wax and apply it in small sections until the entire floor is coated. Allow the wax time to dry, then buff to a shine.

Skip the hassle

There are so many steps involved in waxing a floor, and so much that can go wrong if you don’t have the right tools or the know-how. There is no need to plod through all the steps to floor wax in South Amboy, NJ—not when you can call the professionals at Lov ‘N Kare Carpet Center.

Since 1948, we have worked to provide the area’s best waxing, buffing, rug cleaning, carpet cleaning and more. When you need top-notch service at a fantastic price, call on Lov ‘N Kare Carpet Center. Schedule your appointment today. We can’t wait to hear from you!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *